How to Apply Dip Powder

First of all, exfoliate, manicure, polish the nail surface, and remove the grease on the nail surface. When we are ready, we will start to do it.

Step1: Apply a thin layer of base coat, then dip in the color powder, you can repeat it twice or three times, depending on your needs. (Repeat 3 times, more closer to the powder colors)

Remark: The first layer of base coat should be thin, so that the powder can be applied more even on nails. When applying base coat, please pay attention not to drop the gel outside the bottle opening, if not, the base gel can easily stick to the bottle cap. And it will not be opened the next time when you use it. After used, the cap must be tightened in time to prevent the air from entering, the brush becoming hard and the quality deteriorates.

Step2: After dipped nails, apply a thin layer of activator. Wait 2-3 minutes to dry. Buff and shape nails, then apply a 2nd coat of activator.

Remark: When applying activator, apply it gently on the nail surface, do not use too much force, otherwise it is easy to leave scratches on the nail surface. When finished, tighten the cap in time, if not, it is easy to volatilize and affects the quality.

Step3: After the activator is applied. Apply a thin layer of top coat. Allow it to dry 30s, then apply 2nd layer top coat.

Remark: The first layer should be thin and evenly applied. It should not be too thick, otherwise, it will flow to the nail easily .

Step4: After finishing the nails, clean the brush in brush saver. Frequent clean will extend the life of the brush.

Remark: When finished, tighten the cap in time, if not, it is easy to volatilize and affects the quality.

Pay attention:

Do not leave the gel outside the bottle opening, if not, it is hard to open the bottle again. And when finished, tighten the cap in time, otherwise, the brush will become hard.